Royce//Ayr - Specialized in Customized Tooling

Accura Hss saw blades are manufactured from M-2 (DMo-5) high speed steel and are available in either BRIGHT or VAPOUR finish. A large variety of diameters, thicknesses and bore sizes are available as listed on the following pages. Our manufacturing tolerances closely adhere to or surpass those set by the DIN standards for this tool. These saw blades are made for all makes of cut-off machines. On request we can have our manufacturers make special blades according to your specifications and drawings using different qualities of high speed steel such as M-35 or M-42.

	Harringbone Tooth used for cutting narrow sections of non-ferrous materials such as aluminium and copper.
	Herringbone tooth with alternative chip for thicker blades.
	Curved tooth for cutting solid sections of non-ferrous matrials and materials that produce long chips.
	Curved tooth for cutting narrow sections of steel such as thin wall tubing.
	Curved tooth with hi-lo roughing and finishing teeth for heavy duty cutting of various types and shapes of steel.

HSS cold saw blades are made from HSS/M2 with a blue/black VAPOR finish and are available in sizes from 200 to 400 mm. These heavy duty saw blades are used for cutting steel at low speeds *up to 500 SFPM.

The extremely fine porous layer of

oxide on the surface ehances lubrication and colling. It helps to prevent the formation of "pick-up" on the saw blades and promotes easy chip flow. The saw blade life is prolonged considerably and the cut surfaces are clean and scorefree. When ordering saw blades, please indicate: diameter, thickness, bore size, pinhole pattern, pitch or number of teeth. (see chart below)
Accura HSS saw blades are available in any pitch size you require.
HSS non-ferrous cutting saw blades for non-ferrous materials are made of HSS/M-2 material and designed to run at speed up to 7000 SFPM. These blades are hollow ground, normally in BRIGHT finish and used for cutting aluminum, copper, brass and bronze as well as a variety
of plastics. These blades will allow you to cut the above materials with a very clean and scorefree finish. * other sizes available upon request.
Friction Saw Blades Semi-HSS Friction saw blades are made of chrome vanadium or tungsten molybdenum steel and hollow ground on both sides. They are used on high speed machines to cut at 18,000 to 24,000 SFPM.

*other sizes available upon request.

When ordering your custom cutter, please provide the following information:

1. Number of wings
2. Cutter diameter
3. Bore size
4. Cutter rotation
5. Material running face up or face down.
6. Type of wood you are cutting
7. Cutting with or across the grain
8. Sketch of cutter pattern
(dimensional side views are preferred
or wood sample)
9. Specify Tantung or Carbide